ConPro Firmenlogo
Fahne Deutschland Banner Great Britain Banner Russia Banner Italia Banner China

SoniCon - SL / MH

Measuring - Inspection - Monitoring

with ultrasonic in plastic pipe extrusion

SoniCon SL / MH is a static ultrasonic measuring/inspection and control system for plastic pipes.


SoniCon SL / MH is a worldwide approved ultrasonic measuring and inspection system to control pipes downstream from the vacuum resp. cooling tank. The measuring is done with static positioned ultrasonic sensors. Measuring parameters are wall thickness, excentricity, inner diameter, outer diameter and ovality.
The monitoring and measuring of plastic pipes is carried out by ultrasonic. The measuring chamber type MH has a fold-away design and is flange mounted to the back side of the vacuum tank or cooling tank. Due to the hinge device the sealing exchange can be easily effected.

The plastic pipe is guided through a measuring ring during production. The sensor tubes centre the measuring ring around the pipe. The separate supply of water guarantees a laminar washing-up as well as the water distance. The used silicone sealings have a long service life. Change of dimension is easy and can be carried out without dies. The special design of the measuring rings protects the silicone sealings as well during start-up.

Special features

  • Easy mechanical assembly
  • Wear and maintenance free
  • Very short changeover time
  • Wide diameter range
  • Available up to dimension DN 1600 mm
  • Excellent cost/performance ratio

Technical data SoniCon - SL / MH

The measuring chamber type MH is flange mounted at the back side of the vacuum resp. cooling tank.

A hinge device allows the further access to the existing tank sealing.

The centering of the different pipe diameters is carried out via a mesuring ring. Sensor tubes provide the centering of the measuring ring which defines the water distance.


Technical data SoniCon-SL/MH

Drucken / Print
© 2007-2012 ConPro GmbH | Sitemap | Imprint